切割的英語怎麼說

❶ 請教高手：「切割不斷」用英語怎麼說

應該是 kiss die cutting 這個是名詞形式

❷ 線切割 怎麼翻譯成英語

line cutting

wire-electrode cutting

❸ 各種切割方式 英語怎麼說

various cutting methods
或
different cutting methods

❹ 切割下料用英語怎麼說

切割下料
[網路] cutting stock;
[例句]該機用於鋁塑型材切割下料；
Used for aluminum profile cutting.

❺ 分割英語怎麼說

cut a part
break up
carve up
decollate

❻ 分割的英文怎麼說

• splitthefiles（size）

• 相比於使用盤符的文件系統，盤符將文件系統劃回分成一系列不同的樹(一個盤答符代表一個文件目錄樹)，而Linux系統只有一個文件目錄樹(並沒有分割文件系統)。

  
  

• (oneforeachdrive),Linuxalwayshasasingletree.

❼ 請英文高手翻譯，高分求。（切割方面）

1. 檢驗准備
1. Test preparation （The preparation for test）
1.1 確認檢驗所用的捲尺或鋼尺已經存在。
1.1 To confirm the tape or ruler for the test already exists.
1.2 根據切割操作工作說明，按照工作指令要求產品規格調試機器，通過調節手輪來調節切割尺寸，用捲尺/鋼尺檢查設置的尺寸。
1.2 In accordance with/to the statement of cutting operation, in accordance with the proct specifications of work-instructions to debug the machine by adjusting the hand wheel to adjust the cutting size, using tape measure / ruler check the set size.
2. 檢驗步驟
2. Inspection proceres
2.1 首個產品的檢測
2.1 Detection of/for first proct
2.1.1 長度檢驗: 平均取三個點測量產品的長度，取平均值記錄在表格中；
2.1.1 Test for (the) length : Take three-point in average to measure the length of the proct, take the average and record in the table;
2.1.2 寬度檢驗：平均取三個點測量產品的寬度，取平均值記錄在表格中；
2.1.2 The test for the width :Take the three-point at/in average to measure the width of the proct, take the average and record in the table;
2.1.3 厚度檢驗：測量樣品四個邊的厚度，取平均值記錄在表格中。
2.1.3 Thickness Test: To measure the four sides thickness of the sample , take the average and record in the table.
2.2 正式生產檢驗：
2.2 Formal/(with full) proction test:
2.2.1 根據首個產品的檢驗項目，對正式生產的產品進行檢驗，檢驗採取抽檢方式，抽檢的比例按照《抽樣表》中正常抽樣的要求抽樣數量進行選取，僅記錄不合格品的數量。
2.2.1 According to the first proct of the test items,to have a inspection for the procts which proced in formal way, and inspect the approach of sampling taken, the proportion of sampling in accordance with the normal sample required quantities of"sample table" to select sample, just records the number of unqualified procts.
3. 檢驗結論
3. Test Conclusion
3.1 根據抽樣表和發現的不合格品產品數判定該工作指令的產品是否合格；
3.1 According to the sample table and the found number of defective procts to determine whether the work orders of the procts qualified;
3.1.1 如整批產品不合格，則開出不合格品通知單，按照不合格品通知單處理不合格品；同時在備注中註明。
3.1.1 If the entire batch of proct failure, then notice substandard procts out, according to defective notice dealing with substandard materials; also indicated them in the notes.
3.2.2 如整批產品合格，則把發現的不合格品挑出，如經相關責任人判定產品不能繼續使用，則不合格品作回收處理，同時要求操作人員補足要求的產品數量，在備注中註明。如產品能繼續使用，則應在備注中註明。
3.2.2 If the entire batch of procts are qualified, pick the unqualified items out, if it determined by the relevant responsible persons that the proct which can not continue to be used , then the unqualified goods for recycling, also asked the operator to complement the number of procts required and indicate in the notes . The proct which can continue to be used, it should be also indicated in the notes.
3.2 產品檢驗標准以檢驗標准為准，如有圖紙上有要求，則按照圖紙為准
3.2 Proct testing subject according to the test standards, if something are required in drawings, then the subject according to the blueprint.

❽ 高手，切割片的英文怎麼說

切割片

cutting disk更多釋義>>

[網路短語]

切割片回 cutting disc;cutoff wheel;Cutting Blades
切割片尺寸答 Cutting blade size;Cutting size;Cut sheet size
砂輪切割片 abrasive disc cutter;abrasive disc;cutoff wheel

❾ 可切割，用英語怎麼說

Can cut
例句
可切割各種內孔及小角度切割。
But various cutting inner hole and small angle cutting.

❿ 分隔用英語怎麼說

separate; division; divide; severance; box off;