焊接接頭性能試驗怎麼翻譯

1. 壓力容器明細表的部分 翻譯 接管焊接節點圖 對接焊縫節點圖 接頭 料位計口 內螺紋 支腳

接管焊接來節點圖 Connector welding points map
對接源焊縫節點圖 Butt-joint seam points map
接頭 joint
料位計口
內螺紋 female screw thread
支腳 Spporting leg

2. 翻譯 漢譯英 你翻譯了 我給你300財富值

Since plasma arc welding of austenitic stainless steel after the advent of the West, because of its good weldability, weld appearance, etc., etc., in the field of welding of austenitic stainless steel is widely used.
        This test is mainly to study the plasma arc 06Cr19Ni10 steel microstructure and properties of welded joints, the use of the plasma arc on the thicknesses of 6mm, 8mm and 10mm of 06Cr19Ni10 steel welding, TIG welding use them to cover up. After the test is completed, the weld parameters and mechanical properties of welded joints of shape, and the cross section of the welded joint microstructure morphology analysis, the microstructure and mechanical properties of welded joints of different thicknesses 06Cr19Ni10 steel.
         The results show that for a plasma arc 06Cr19Ni10 steel welded joints, the structure of the base material mainly austenitic, and some granular carbide distribution, and the presence of twins. HAZ mainly austenite and carbide zonal distribution of precipitation was based. Weld organization was equiaxed dendrite and cellular austenite and was like dendrites of δ ferrite. Welded joint tensile strength with increasing thickness varying degrees of increased incidence. Bending performance test joint defect does not appear, indicating that the good performance of welded joints. 10mm joint best impact toughness specimens 6mm, 8mm followed. And with the increase in thickness of the sample, the hardness is also increased to varying degrees. Weld shape parameters also showed the best quality of welded joints of 10mm, 8mm, 6mm second.
我學的就是商務英語專業，希望能幫助你。
記得採納哦！下次繼續合作！

3. 關於「SiCw/6061Al復合材料擴散焊過程和接頭微觀結構形態」論文翻譯的專業詞彙

這個專業的資料挺多。