切割的英语怎么说

❶ 请教高手：“切割不断”用英语怎么说

应该是 kiss die cutting 这个是名词形式

❷ 线切割 怎么翻译成英语

line cutting

wire-electrode cutting

❸ 各种切割方式 英语怎么说

various cutting methods
或
different cutting methods

❹ 切割下料用英语怎么说

切割下料
[网络] cutting stock;
[例句]该机用于铝塑型材切割下料；
Used for aluminum profile cutting.

❺ 分割英语怎么说

cut a part
break up
carve up
decollate

❻ 分割的英文怎么说

• splitthefiles（size）

• 相比于使用盘符的文件系统，盘符将文件系统划回分成一系列不同的树(一个盘答符代表一个文件目录树)，而Linux系统只有一个文件目录树(并没有分割文件系统)。

  
  

• (oneforeachdrive),Linuxalwayshasasingletree.

❼ 请英文高手翻译，高分求。（切割方面）

1. 检验准备
1. Test preparation （The preparation for test）
1.1 确认检验所用的卷尺或钢尺已经存在。
1.1 To confirm the tape or ruler for the test already exists.
1.2 根据切割操作工作说明，按照工作指令要求产品规格调试机器，通过调节手轮来调节切割尺寸，用卷尺/钢尺检查设置的尺寸。
1.2 In accordance with/to the statement of cutting operation, in accordance with the proct specifications of work-instructions to debug the machine by adjusting the hand wheel to adjust the cutting size, using tape measure / ruler check the set size.
2. 检验步骤
2. Inspection proceres
2.1 首个产品的检测
2.1 Detection of/for first proct
2.1.1 长度检验: 平均取三个点测量产品的长度，取平均值记录在表格中；
2.1.1 Test for (the) length : Take three-point in average to measure the length of the proct, take the average and record in the table;
2.1.2 宽度检验：平均取三个点测量产品的宽度，取平均值记录在表格中；
2.1.2 The test for the width :Take the three-point at/in average to measure the width of the proct, take the average and record in the table;
2.1.3 厚度检验：测量样品四个边的厚度，取平均值记录在表格中。
2.1.3 Thickness Test: To measure the four sides thickness of the sample , take the average and record in the table.
2.2 正式生产检验：
2.2 Formal/(with full) proction test:
2.2.1 根据首个产品的检验项目，对正式生产的产品进行检验，检验采取抽检方式，抽检的比例按照《抽样表》中正常抽样的要求抽样数量进行选取，仅记录不合格品的数量。
2.2.1 According to the first proct of the test items,to have a inspection for the procts which proced in formal way, and inspect the approach of sampling taken, the proportion of sampling in accordance with the normal sample required quantities of"sample table" to select sample, just records the number of unqualified procts.
3. 检验结论
3. Test Conclusion
3.1 根据抽样表和发现的不合格品产品数判定该工作指令的产品是否合格；
3.1 According to the sample table and the found number of defective procts to determine whether the work orders of the procts qualified;
3.1.1 如整批产品不合格，则开出不合格品通知单，按照不合格品通知单处理不合格品；同时在备注中注明。
3.1.1 If the entire batch of proct failure, then notice substandard procts out, according to defective notice dealing with substandard materials; also indicated them in the notes.
3.2.2 如整批产品合格，则把发现的不合格品挑出，如经相关责任人判定产品不能继续使用，则不合格品作回收处理，同时要求操作人员补足要求的产品数量，在备注中注明。如产品能继续使用，则应在备注中注明。
3.2.2 If the entire batch of procts are qualified, pick the unqualified items out, if it determined by the relevant responsible persons that the proct which can not continue to be used , then the unqualified goods for recycling, also asked the operator to complement the number of procts required and indicate in the notes . The proct which can continue to be used, it should be also indicated in the notes.
3.2 产品检验标准以检验标准为准，如有图纸上有要求，则按照图纸为准
3.2 Proct testing subject according to the test standards, if something are required in drawings, then the subject according to the blueprint.

❽ 高手，切割片的英文怎么说

切割片

cutting disk更多释义>>

[网络短语]

切割片回 cutting disc;cutoff wheel;Cutting Blades
切割片尺寸答 Cutting blade size;Cutting size;Cut sheet size
砂轮切割片 abrasive disc cutter;abrasive disc;cutoff wheel

❾ 可切割，用英语怎么说

Can cut
例句
可切割各种内孔及小角度切割。
But various cutting inner hole and small angle cutting.

❿ 分隔用英语怎么说

separate; division; divide; severance; box off;