焊接接头性能试验怎么翻译

1. 压力容器明细表的部分 翻译 接管焊接节点图 对接焊缝节点图 接头 料位计口 内螺纹 支脚

接管焊接来节点图 Connector welding points map
对接源焊缝节点图 Butt-joint seam points map
接头 joint
料位计口
内螺纹 female screw thread
支脚 Spporting leg

2. 翻译 汉译英 你翻译了 我给你300财富值

Since plasma arc welding of austenitic stainless steel after the advent of the West, because of its good weldability, weld appearance, etc., etc., in the field of welding of austenitic stainless steel is widely used.
        This test is mainly to study the plasma arc 06Cr19Ni10 steel microstructure and properties of welded joints, the use of the plasma arc on the thicknesses of 6mm, 8mm and 10mm of 06Cr19Ni10 steel welding, TIG welding use them to cover up. After the test is completed, the weld parameters and mechanical properties of welded joints of shape, and the cross section of the welded joint microstructure morphology analysis, the microstructure and mechanical properties of welded joints of different thicknesses 06Cr19Ni10 steel.
         The results show that for a plasma arc 06Cr19Ni10 steel welded joints, the structure of the base material mainly austenitic, and some granular carbide distribution, and the presence of twins. HAZ mainly austenite and carbide zonal distribution of precipitation was based. Weld organization was equiaxed dendrite and cellular austenite and was like dendrites of δ ferrite. Welded joint tensile strength with increasing thickness varying degrees of increased incidence. Bending performance test joint defect does not appear, indicating that the good performance of welded joints. 10mm joint best impact toughness specimens 6mm, 8mm followed. And with the increase in thickness of the sample, the hardness is also increased to varying degrees. Weld shape parameters also showed the best quality of welded joints of 10mm, 8mm, 6mm second.
我学的就是商务英语专业，希望能帮助你。
记得采纳哦！下次继续合作！

3. 关于“SiCw/6061Al复合材料扩散焊过程和接头微观结构形态”论文翻译的专业词汇

这个专业的资料挺多。